Column type Curing Press
Introduction
We designed our column type curing press to cure simultaneously on two working places by opening and closing motion of the lower and upper pressure plates supported by hydraulic cylinders. Work forces occurring during the curing process are trapped in a bayonet closure integrated in the lower pressure plate. To securely position the bladder inside the upper and lower clamp rings a rolling in bladder control mechanism is used. In addition the distance between the clamping rings is adjustable to enable the usage of various kinds of tire types and dimensions.
The press is equipped with automated loaders for loading the green tires and unloading the finished products which both are fully integrated in the control system Siemens S7 300.
Specifications
|
Heat shield - inner diameter(inch) |
45 |
48 |
|
Closing force(KN) |
1500 kN |
1800 kN |
|
Bead diameter(inch) |
13-17 |
14-20 |
|
Green tire max height(mm) |
420 mm |
420 mm |
|
Dimensions(mm) |
3146 x 3400 x 4100 mm |
3300 x 3400 x 4510 mm |
|
Weight (without containers)(tons) |
14,2 tons |
16,2 tons |
|
Pneumatics |
FESTO
|
|
|
Control system |
SIEMENS S7 300
|
|
|
隔热板-内径 |
45'' |
48'' |
|
合模力 |
1500 kN |
1800 kN |
|
轮缘直径 |
13'' - 17'' |
14'' - 20'' |
|
生胎最大高度 |
420 mm |
420 mm |
|
尺寸 |
3146 x 3400 x 4100 mm |
3300 x 3400 x 4510 mm |
|
重量（不含容器） |
14,2 tons |
16,2 tons |
|
气动 |
FESTO |
|
|
控制系统 |
SIEMENS S7 300 |
|